健康城市视角下应对突发公共事件的城市设计策略

 结合中国城市应对新冠肺炎疫情的成功经验及缺憾，以创造健康、宜居、韧性、生态的城市环境为目标，设计“区域-系统-节点”三类健康城市设计路径；提出“生态健康-生活健康-治愈健康-环境健康-设施健康-救治健康”六位一体应对突发公共事件的城市设计策略，并细化为健康城市在城市空间上的形象化设计表达。     

基于聚类层次分析模型的社区老年活动场所研究——以福州市中心城区为例

 作为老年人生活空间的重要组成部分，社区老年活动场所的建设须考虑老年人的活动特点和需求。以福州市中心城区的典型社区老年活动场所为例，采用OD调查法与相关分析法等确定了影响社区老年活动场所到访量的因子，并以SD法、德尔菲法等确定各影响因子的权重值，最终构建社区老年活动场所聚类层次分析评价模型，以评价各类型的社区老年活动场所。     

熊果酸在神经精神系统疾病中的药理作用及机制研究进展

 熊果酸（ursolic acid，UA）是一种五环三萜类化合物，存在于熊果、女贞叶、枇杷叶等植物中。熊果酸不仅具有抗氧化、抗炎、抗肿瘤、抗糖尿病、保肝等药理活性，还具有改善和治疗多种神经精神系统疾病的作用。通过文献分析，归纳总结了熊果酸在神经元损伤、脑血管疾病和精神障碍中的药理作用及其作用机制的研究进展。     

Predicting Initial Formation Temperature for Deep Well Engineering with a New Method

With the progress of science and technology, human beings explore the energy under-ground with thousands of meters. As a thermophysical parameter, initial formation temperature (IFT) plays an essential...     

150t冷藏船模型制作研究

该文主要针对教科书中出现的150t冷藏船实例进行船体模型制作研究，在搜集了150t冷藏船的相关数据后，通过分析其基本结构图、总布置图后，结合绘制的型线图、船体相关信息文件，肋位的划分，绘出全宽肋骨型线图，并针对每一肋位的全宽肋骨型线图，设计其肋板、肋骨、横梁的具体结构、尺寸，最后按照分段划分图，对分段结构进行设计与建造。在模型的制作过程中，每一分段的装配都以《船舶建造工艺学》里的建造工艺流程为依据并结合实际情况进行模型制作，最后进行整船的合拢。     

基于低碳理念的鄂州市城市土地集约利用评价

结合国内外低碳土地利用的研究背景和实践,分析出不同土地利用方式碳排放效应,并对城市土地低碳化与集约化利用进行定性与定量分析,并采用鄂州市实际构建低碳理念下城市土地集约利用评价指标体系,对鄂州市2000-2013年土地利用状况进行分析评价.由此,总结鄂州市再加入低碳因素后土地集约利用的变化规律,并提出相关建议.     

In situ backscattered electron imaging study of the effect of annealing on the deformation behaviors of Ni electroformed from additive-free and saccharin-containing sulfamate solutions

The Ni samples were electroformed from additive-free(AF) and saccharin-containing(SC) sulfamate solutions, respectively. In situ backscattered electron(BSE) imaging, electron backscatter diffraction(EBSD), and electron-probe microanalysis(EPMA) were used to investigate the effect of annealing on the deformation behaviors of the AF and SC samples. The results indicate that columnar grains of the as-deposited AF sample had an approximated average width of 3 μm and an approximated aspect ratio of 8. The average width of columnar grains of the as-deposited SC sample was reduced to approximately 400 nm by the addition of saccharin to the electrolyte. A few very-large grains distributed in the matrix of the SC sample after annealing. No direct evidence indicated that S segregated at the grain boundaries before or after annealing. The average value of the total elongations of the SC samples decreased from 16% to 6% after annealing, whereas that of the AF samples increased from 18% to 50%. The dislocation recovery in grain-boundary areas of the annealed AF sample was reduced, which contributed to the appearance of microvoids at the triple junctions. The incompatibility deformation between very-large grains and fine grains contributed to the brittle fracture behavior of the annealed SC Ni.     

碳化细菌纤维素在钙钛矿太阳能电池对电极中的研究

在高效的钙钛矿太阳能电池(PSCs)中，通常采用贵金属对电极(Au、Ag)和昂贵的空穴传输材料(HTM)，导致了高成本和不稳定等问题.该研究使用稳定的无HTM的CsPbBr3纯无机钙钛矿的PSCs，将结构优异的天然纳米生物材料细菌纤维素(BC)经过高温碳化得到具有纳米精细结构、大表面积和孔容的多介孔碳化细菌纤维素(CBC)材料，对该材料进行SEM、XRD、FT-IR、比表面积、电导率测试以证实该材料在PSCs上的应用潜质.根据PSCs对电极的应用需要，将CBC及其与商业导电碳浆(CS)混合物作为PSCs对电极材料，通过J-V、IPCE等测试，发现纯CBC材料的电池效率高于纯CS，在作为PSCs对电极方面具有很大的潜力.该研究不仅扩大了生物质碳材料的应用领域，而且有望将CBC作为低成本稳定高效PSCs对电极材料.     

大数据营销:综述与展望

随着追踪消费者足迹能力的增强,营销科学正经历着一场大数据的革命.为了了解大数据背景下消费者行为和营销战略的改变,此项研究结合近十余年大数据营销的有关文献,梳理了大数据营销的相关概念,类型及分析方法,并提炼出搜索、移动、口碑、数字化、APP和社会媒体等50个大数据营销的热门主题.在此基础之上,分别从互联网、社会网络、移动互联网、大数据和人工智能等四个阶段对大数据营销的研究进展进行回顾,最后围绕客户旅程,营销活动的量化评估和营销分析技术的开发三个方面对大数据营销的未来研究方向进行展望.     

Influence of γ' precipitate on deformation and fracture during creep in PM nickel-based superalloy

FGH96 is a powder metallurgy nickel based superally used for turbine disk of aero-engines. In the present study FGH96 alloy with four different γ' precipitate microstructures were produced via solution heat-treatment with different cooling rates, and the maximum cooling rate reached 400°C/min which was a super cooling rate for Nickel-based superalloy. The creep tests were conducted for PM FGH96 alloy under the testing condition of 704°C and 690 MPa. The relationship between the creep properties and the distribution of γ' precipitate was established. The creep mechanism was analyzed by using TEM and ACTEM, and the dislocation movement was studied at the atomic scale. The creep strain rate was calculated through a physically based crystal slip model established based on crystal plasticity. The calculated results were consistent with the test ones, illustrating the validity of the model. The fracture mechanism was also investigated, and the results showed that the creep cracks generated on the surface due to the oxidation. It was observed that the cracks propagated in different ways depending on the different average diameters of γ' precipitate. With the decrease of the average γ' precipitate size,the critical shearing stress increased and the resistance of the dislocation slipping increased. The fracture mechanism for the primary stage transformed from intragranular to intergranular due to the change of dislocation slipping.